HP SAS SATA Hard Drives DELL SAS SATA Hard Drives IBM SAS SATA Hard Drives Seagate SAS SATA Hard Drives  Create Account    Your Cart    Checkout    Contact Us       
  Home: 

DL140 G3 QuickSpecs

Login | Create Account | Your Cart | Checkout | Contact Us  


 Search   |   |   Advanced Search 
      DL QuickSpecs
      DL120
  DL120 G5
  DL120 G6
  DL120 G7
      DL140
  DL140 G2
  DL140 G3
      DL145
  DL145 G1
  DL145 G2
  DL145 G3
      DL160
  DL160 G5
  DL160 G5p
  DL160 G6
      DL160se
  DL160se G6
      DL165
  DL165 G5
  DL165 G5p
  DL165 G6
  DL165 G7
      DL170h
  DL170h G1
      DL180
  DL180 G5
  DL180 G6
      DL185
  DL185 G5
      DL320
  DL320 G1
  DL320 G2
  DL320 G3
  DL320 G4
  DL320 G5
  DL320 G6
      DL360
  DL360 G1
  DL360 G2
  DL360 G3
  DL360 G4
  DL360 G4p
  DL360 G5
  DL360 G6
  DL360 G7
      DL365
  DL365 G1
  DL365 G5
      DL380
  DL380 G1
  DL380 G2
  DL380 G3
  DL380 G4
  DL380 G5
  DL380 G6
  DL380 G7
      DL385
  DL385 G1
  DL385 G2
  DL385 G5
  DL385 G5p
  DL385 G6
  DL385 G7
      DL560
  DL560 G1
      DL580
  DL580 G1
  DL580 G2
  DL580 G3
  DL580 G4
  DL580 G5
  DL580 G7
      DL585
  DL585 G1
  DL585 G2
  DL585 G5
  DL585 G6
  DL585 G7
      DL740
  DL740 G1
      DL760
  DL760 G1
  DL760 G2
      DL785
  DL785 G5
  DL785 G6
      DL1000
  DL1000
      ML QuickSpecs
      ML110
  ML110 G1
  ML110 G2
  ML110 G3
  ML110 G4
  ML110 G5
  ML110 G6
  ML110 G7
      ML115
  ML115 G1
  ML115 G5
      ML150
  ML150 G2
  ML150 G3
  ML150 G5
  ML150 G6
      ML310
  ML310 G1
  ML310 G2
  ML310 G3
  ML310 G4
  ML310 G5
  ML310 G5p
      ML330
  ML330 G1
  ML330 G2
  ML330 G3
      ML350
  ML350 G1
  ML350 G2
  ML350 G3
  ML350 G4
  ML350 G4p
  ML350 G5
  ML350 G6
      ML370
  ML370 G1
  ML370 G2
  ML370 G3
  ML370 G4
  ML370 G5
  ML370 G6
      ML530
  ML530 G1
  ML530 G2
      ML570
  ML570 G1
  ML570 G2
  ML570 G3
  ML570 G4
      ML750
  ML750 G1
      BL QuickSpecs
      BL10e
  BL10e G2
      BL20p
  BL20p G3
  BL20p G4
      BL25p
  BL25p G1
      BL260c
  BL260c G5
      BL280c
  BL280c G6
      BL2x220c
  BL2x220c G5
      BL30p
  BL30p G1
      BL35p
  BL35p G1
      BL40p
  BL40p G1
      BL45p
  BL45p G1
  BL45p G2
      BL460c
  BL460c G1
  BL460c G6
  BL460c G7
      BL465c
  BL465 G1
  BL465c G5
  BL465c G6
  BL465c G7
      BL480c
  BL480c G1
      BL495c
  BL495c G5
  BL495c G6
      BL60p
  BL60p G1
      BL680c
  BL680c G5
      BL685c
  BL685c G1
  BL685c G5
  BL685c G6
  BL685c G7
      BL860c
  BL860cG1
      CL QuickSpecs
      CL1850
  CL1850 G1
      CL380
  CL380 G1
   Proliant DL140 G3 QuickSpecs  US QuickSpecs 
  DL140 G3 Hard Drives   DL140 G3 Processors   DL140 G3 Memory
  DL140 G3 Controllers   DL140 G3 Networking   DL140 G3 Power Supplies
  DL140 G3 Quickspecs   DL140 G3 Quickspecs-Options   DL140 G3 Options
contents
 Overview      Standard Features      HPC Interconnects      Models      Configuration Information - Factory Integrated Models      DL140 G3 Options      DL140 G3 Memory      Storage      Power Specifications      System Specifications      DL140 G3 QuickSpecs images/line.gif (50 bytes)

Proliant DL140 G3 Overview

HP ProLiant DL140 Generation 3 (G3)

Hot Plug SAS/SATA Models
Proliant DL140 G3 Front View:Proliant DL140 G3 Rear View:
1.Access panel1.Two GbE LAN ports for NIC 1 and NIC 2 (RJ-45)
2.Two Non-Hot Plug SATA 3.5" Hard Drive Bays or Two Hot Plug SAS/SATA 3.5" Hard Drive 2.Low-Profile PCI Express x8/PCI-X riser board slot DL140 G3 Cover
3.Rear USB ports
3.Optional CD- or DVD-ROM drive4.Video Port
4.System LEDs5.Serial Port
5.USB Port6.PS/2 Keyboard Port
6.Power on/off7.PS/2 Mouse Port
7.
System Fans
8.LO100i 10/100 Mbps LAN port for IPMI management (RJ-45)
8.
Quad-Core and Dual-Core Intel® Xeon® Processors (Supports up to Two)
9.Standard height/full-height PCI Express x16/PCI-X riser board
10.Power Supply Cable Socket
9.PC2-5300 Fully Buffered DIMMs (DDR2-667) memory slots 
10.Expansion Slots:
Non-Hot Plug Models - Two available PCI-Express slots
Hot-Plug Models - One available PCI-Express slot
11.Power Supply (650 Watts)
12.SAS/SATA Hot Plug Backplane (Hot Plug SAS/SATA Model)

What's New
  • Support for:
    • Quad-Core Intel® Xeon® processor X5365 (3.0 GHz, 120 W, 1333MHz Front Side Bus FSB)
    • Quad-Core Intel® Xeon® processor L5335 (2.00 GHz, 50 W, 1333MHz FSB, Low Voltage)

At A Glance
  • Processors:
    • Supports up to two Quad-Core and Dual-Core Intel® Xeon® processors: 5300 and 5100 sequence
      • Quad-Core Intel® Xeon® processors 5300 sequence with 8MB Level 2 cache
      • Dual-core Intel® Xeon® processor 5100 sequence with 4MB Level 2 cache
    • Intel® 5000X Chipset
  • Memory:
    • Supports up to 32 GB PC2-5300 Fully Buffered DIMMs (DDR2-667) with Advanced ECC
  • Internal Drive Support:
    • Supports up to two:
      • Non-Hot Plug Serial ATA (SATA) 3.5"hard drives; or
      • Hot Plug Serial Attached SCSI (SAS/Serial ATA (SATA) 3.5"hard drives
    • Internal storage capacity of up to 1.5TB (2 x 750GB Hot Plug 3.5" SATA hard drives), 1 TB (2 x 500 Non-Hot Plug SATA hard drives) or 600GB (2 x 300GB Hot Plug 3.5" SAS hard drives)
  • Network Controller:
    • Two embedded NC320i PCIe Gigabit Server Adapters
  • Storage Controllers:
    • HP Embedded SATA RAID Controller on Non-Hot Plug SATA Models
    • HP 8 Internal Port SAS HBA with RAID 0,1 on Hot Plug SAS/SATA Models
    • HP Smart Array E500 Controller
    • HP Smart Array E200 Controller
    • HP SC11Xe Host Bus Adapter
    • HP SC44Ge Host Bus Adapter
  • Expansion Slots:
    • Non-Hot Plug Models:
      • Two available PCI Express slots:
        • Slot 1: full-length/full-height PCI-Express x16
        • Slot 2: low-profile/half-height PCI-Express x8
    • Hot Plug Models:
      • One available PCI-Express slot:
        • Slot 1: full-length/full-height PCI-Express x16
        • Slot 2: low-profile/half-height PCI-X slot populated by the SAS/SATA storage controller
  • Management:
    • IPMI 2.0 support
    • HP Lights Out 100i Remote Management with new licensed key activated upgrades for Virtual KVM and virtual media support
    • ROM Setup Utility
  • USB Ports:
    • Four USB ports (two front, two rear)
  • Optical Drive:
    • Support for one (optional): CD-ROM, DVD-ROM, DVD RW, DVD/CD RW
  • Power Supply:
    • 650W Power Supply (Non-Hot Plug, Autoswitching)
  • Additional Features:
    • Support for:
      • NVIDIA Quadro FX3500 256MB PCIe graphics card
      • NVIDIA Quadro FX1500 256MB PCIe graphics card
  • Form Factor:
    • 1U rack models
  • Deployment/Serviceability:
    • Tool-less access to all system components for easy in rack serviceability
  • Warranty: This product is covered by a global limited warranty and supported by HP Services and a worldwide network of HP Authorized Channel Partners. Hardware diagnostic support and repair is available for one year from date of purchase. Support for software and initial setup is available for 90 days from date of purchase. Additional support may be covered under the warranty or available for an additional fee. Enhancements to warranty services are available through HP Care Pack services or customized service agreements. Certain restrictions and exclusions apply. SATA hard drives have a one year warranty.
contents
 Overview      Standard Features      HPC Interconnects      Models      Configuration Information - Factory Integrated Models      DL140 G3 Options      DL140 G3 Memory      Storage      Power Specifications      System Specifications      DL140 G3 QuickSpecs images/line.gif (50 bytes)

Standard Features

NOTE: For a brief, printer friendly data sheet that describes this product and informs you of the essential capabilities and specifications, please visit: http://h71028.www7.hp.com/ERC/downloads/4AA0-6065ENW.pdf
NOTE: For the Standard Features shipped in the Factory Integrated Models, please see the "Configuration Information - Factory Integrated Models" section.
Processor
One of the following depending on Model
Quad-Core Intel® Xeon® processor X5365 (3.0 GHz, 120 W, 1333MHz Front Side Bus FSB)
NOTE: Available through Configure To Order only. See Factory Integration Models section for more details.
Quad-Core Intel® Xeon® processor X5355 (2.66 GHz, 120 W, 1333MHz Front Side Bus FSB)
NOTE: Available through Configure To Order only. See Factory Integration Models section for more details.
Quad-Core Intel® Xeon® processor E5345 (2.33 GHz, 80 W, 1333MHz FSB)
Quad-Core Intel® Xeon® processor E5335 (2.00 GHz, 80 W, 1333MHz FSB)
NOTE: Available through Configure To Order only. See Factory Integration Models section for more details.
Quad-Core Intel® Xeon® processor L5335 (2.00 GHz, 50 W, 1333MHz FSB, Low Voltage)
NOTE: Available through Configure To Order only. See Factory Integration Models section for more details.
Quad-Core Intel® Xeon® processor L5320(1.86GHz, 50W, 1066MHz FSB, Low Voltage)
NOTE: Available through Configure To Order only. See Factory Integration Models section for more details.
Quad-Core Intel® Xeon® processor E5320 (1.86 GHz, 80 W, 1066MHz FSB)
NOTE: Available through Configure To Order only. See Factory Integration Models section for more details.
Quad-Core Intel® Xeon® processor E5310 (1.60 GHz, 80 W, 1066MHz FSB)
Dual-Core Intel® Xeon® processor 5160 (3.00 GHz, 80 W, 1333MHz FSB)
Dual-Core Intel® Xeon® processor 5150 (2.66 GHz, 65 W, 1333MHz FSB)
NOTE: Available through Configure To Order only. See Factory Integration Models section for more details.
Dual-Core Intel® Xeon® processor 5148 (2.33 GHz, 40 W, 1333MHz FSB, Low Voltage)
NOTE: Available through Configure To Order only. See Factory Integration Models section for more details.
Dual-Core Intel® Xeon® processor 5140 (2.33 GHz, 65 W, 1333MHz FSB)
Dual-Core Intel® Xeon® processor 5130 (2.0 GHz, 65 W, 1333MHz FSB)
NOTE: Available through Configure To Order only. See Factory Integration Models section for more details.
Dual-Core Intel® Xeon® processor 5110 (1.60 GHz, 65 W, 1066MHz FSB)

Upgradeability
Upgradeable to two processors
Upgradeable to Xeon® Series 5300 Quad-Core, or 5100 Dual-Core processors (Please contact your regional sales support to determine quad core upgradeability. Some of the earlier shipping models may not support this upgrade)

Chipset Intel® 5000X Chipset

Cache Memory 8MB (2 x 4MB) Level 2 cache (5300 sequence)
4MB (1 x 4MB) Level 2 cache (5100 sequence)

Memory Protection Memory mirroring with Advanced ECC capabilities

Memory Type PC2-5300 Fully Buffered DIMMs (DDR2-667)
Standard 1 GB (2 x 512 MB)
Maximum 32 GB (8 x 4 GB)

Network Controller Two embedded NC320i PCIe Gigabit Server Adapters

Expansion Slots #
Technology
Width
Connector Width
Bus Number*
Form Factor
Notes
1

PCI Express 2.0

X16
X16
1
Full length,
full height slot
Standard-Reserved slot for Smart Array P400 Controller
1

PCI-X

133/100MHz
N/A
5
Full length,
full height slot
Options - 100MHz bus speed operates when 2 PCI-X cards are populated

2

PCI Express 2.0

X4
X8
6
Low-profile slot
Recommended for XX Card
2

PCI-X

133/100MHz
N/A
5
Low-profile slot
Options - 100 MHz bus speed operates when 2 PCI-X cards are populated
  NOTE: All slots can accept universal keyed PCI cards
* Default bus assignment. Inserting cards with PCI bridges may alter the actual bus assignment number.
** Slots are enumerated differently based on OS. MS OS's enumerate from lowest to highest Device ID by bus (starting with the lowest bus).
*** PCI-X bus speed will be 133MHz when only one PCI-X card is installed. It will be 100MHz when both slots have PCI-X cards installed.

Storage Controller Non-Hot Plug SATA Models HP Embedded SATA RAID Controller (integrated into the south-bridge) supporting SW RAID 0,1
Hot Plug SAS/SATA Models HP 8 Internal Port SAS HBA with RAID 0,1
NOTE: A diskette drive is needed to install storage controller drivers during a Windows operating system installation from a CD.

Storage Optical Drives:  
DVD-ROM 8x IDE (ATAPI) DVD-ROM drive, slim (optional)
CD-ROM 24x IDE (ATAPI) CD-ROM drive (optional)
DVD RW 8x IDE (ATAPI) DVD-ROM drive, slim (optional)
DVD/CD RW 24x IDE (ATAPI) CD-ROM drive (optional)
Diskette Drives Via USB only
Drive Bays:  
Non-Hot Plug SATA Up to 2 non-hot plug SATA 3.5" drives
Hot-Plug SAS/SATA Up to 2 hot plug SAS/SATA 3.5" drives

Maximum Internal Storage Non-Hot Plug SATA 1TB 2 x 500GB
Hot Plug SATA 1.5TB 2 x 750GB
Non-Hot Plug SAS 600GB 2 x 300GB
Hot Plug SAS 600GB 2 x 300GB

Interfaces Parallel None
Network RJ-45 (Ethernet) 2 10/100/1000 NIC ports (plus 1 dedicated for the HP ProLiant Lights Out 100i Remote Management)
Serial 1
Pointing Device (Mouse) 1
Graphics 1
Keyboard 1
USB 4 (two front, two rear)
NOTE: Please see the following URL for additional information regarding USB support:
http://h18004.www1.hp.com/products/servers/platforms/usb-support.html.

Graphics Integrated on the system board:
1280 x 1024 at 8bpp (bits per pixel) or 2^8 = 256 colors
or
1024 x 768 at 16bpp (bits per pixel) or 2^16 = 65536 or 64k colors

Form Factor Rack (1U), (1.75 in/4.45 cm)

Server Management Stand Alone Software Product and ProLiant EssentialsHP Systems Insight ManagerHP Systems Insight Manager (HP SIM) provides a unified, secure and extensible standards-based environment to centrally manage servers, storage and other infrastructure devices, (both HP and non-HP) across multiple operating system platforms.
Rapid Deployment Pack (RDP)Rapid Deployment Pack (RDP) extends HP Systems Insight Manager with a complete deployment solution for select HP ProLiant 100 series servers. RDP provides a central location to configure server hardware, deploy Windows, Linux and VMware ESX operating environments and install HP ProLiant Support Pack drivers using images and scripted profiles. For more information, visit: http://www.hp.com/servers/rdp
NOTE: Flexible and volume quantity license kits are available for ProLiant Essentials Value Packs. Refer to: http://www.hp.com/servers/proliantessentials or the various ProLiant Essentials Value Pack product QuickSpecs for more information.
HP Lights-Out 100i Remote Management

HP Lights-Out 100i Remote Management delivers affordable, entry level remote management capabilities for HP ProLiant 100 Series servers with embedded LO100i. It allows customers or their service providers to remotely manage ProLiant 100 Series servers remotely over a LAN or the Internet and consists of the following:

  • LO100i Standard is embedded remote management and provides basic remote control via telnet, browser, and IPMI 2.0 and SMASH
  • LO100i Select Pack License are upgrades for essential, secure, remote control, serial console and virtual media
  • LO100i Advanced Pack License are upgrades for all the features of LO100i Select plus Virtual KVM (graphical hardware-based, remote console)
NOTE: Flexible and volume quantity (AKA) license kits are available for both the Lights-Out 100i Select and Lights-Out 100 Advanced Pack licenses as well as Electronic License To Use (E-LTU). AKA Tracking licenses require a 100 unit minimum forecast at initial contract signing. For these additional part numbers, please refer to each software products' QuickSpecs at this link for more information: http://h18004.www1.hp.com/products/servers/management/remotemgmt.html.

Core Infrastructure ManagementSubscriber's ChoiceSubscriber's Choice Driver and Support Alerts/Notifications is a web-based email subscription service that provides software and driver change notifications for ProLiant products. Sign up at: http://www.hp.com/go/subscriberschoice and customize your profile to receive various new alerts as they become available, on a weekly or monthly basis.
ROMPaq software and latest driversThe latest software, drivers, and firmware fully optimized and tested for your ProLiant server and options, available through ProLiant Support Packs or downloaded from software and drivers download pages website at: http://www.hp.com/go/support.

Industry Standard Compliance ACPI V2.0 Compliant
PCI 2.2 Compliant
PXE Support
WOL Support
Microsoft® Logo certifications
IPMI 2.0 Compliant

Manageability

HP Lights-Out 100i Standard providing the following OS-independent remote control capabilities:

  • Virtual power
  • System event log access
  • System health
  • Remote Serial console (serial redirection)
  • Browser, Telnet access
  • SM-CLP compliant
  • IPMI 2.0 compliant

HP Lights-Out 100i Select Pack providing license key activated upgrades to the following:

  • Virtual media (Floppy and CD)
  • Secure Socket Layer Encryption
  • Secure Shell Encryption

HP Lights-Out 100i Advanced Pack providing license key activated upgrades to the following:

  • Virtual KVM (KVM over IP functionality embedded on the system board) plus all of the LO100i Select Pack features above.

Security Power-on password
Setup password

Server Power CordsOne Highline IEC Power cord ships standard (for connection to a Power Distribution Unit)
NOTE: Rack models ship standard with an IEC cable.

UPS and PDU Power
Cord Matrix
Please see the UPS and PDU cable matrix that lists cable descriptions, requirements, and specifications for UPS and PDU units:
ftp://ftp.compaq.com/pub/products/servers/ProLiantstorage/power-protection/powercordmatrix.pdf.

Power Supply 650 Watts, auto-switching, PFC (Power Factor Correcting)

System Fans 6 system fans ship standard; Non-hot plug, Non-redundant

OS SupportMicrosoft Windows® 2000 Server (32-bit)
Microsoft Windows 2000 Advanced Server (32-bit)
Microsoft Windows 2003 and Microsoft Windows 2003/R2 Standard Edition (32-bit)
Microsoft Windows 2003 and Microsoft Windows 2003/R2 Enterprise Edition (32-bit)
Microsoft Windows 2003 and Microsoft Windows 2003/R2 Web Edition (32-bit)
Microsoft Windows 2003 and Microsoft Windows 2003/R2 for Extended Systems Standard Edition (64-bit)
Microsoft Windows 2003 and Microsoft Windows 2003/R2 for Extended Systems Enterprise Edition (64-bit)
Microsoft Windows 2008
Red Hat Enterprise Linux
SUSE Linux Enterprise Server
NOTE: For more complete and up-to-date information of all supported OSes for ProLiants, certification information and how to buy server operating systems from HP please visit the OS product site at: http://h18004.www1.hp.com/products/servers/software/OEM.html.
NOTE: For an up-to-date listing of the latest software and drivers available for your server, please select your server: http://h20000.www2.hp.com/bizsupport/TechSupport/Product.jsp?lang=en&cc
=us&taskId=135&prodTypeId=15351&prodCatId=241435
.

Rack Airflow RequirementsRack 10000 series Cabinets
The increasing power of new high-performance processor technology requires increased cooling efficiency for rack-mounted servers. The 10000 Series Racks provide enhanced airflow for maximum cooling, allowing these racks to be fully loaded with servers using the latest processors.
CAUTION: If a third-party rack is used, observe the following additional requirements to ensure adequate airflow and to prevent damage to the equipment.

Front and rear doors: If your 42U server rack includes closing front and rear doors, you must allow 5,350 sq cm (830 square inches) of hole evenly distributed from top to bottom to permit adequate airflow (equivalent to the required 64 percent open area for ventilation).
Side: The clearance between the installed rack component and the side panels of the rack must be a minimum of 7 cm (2.75 inches)
CAUTION: Always use blanking panels to fill all remaining empty front panel U-spaces in the rack. This arrangement ensures proper airflow. Using a rack without blanking panels results in improper cooling that can lead to thermal damage.
NOTE: For additional information, refer to the Setup and Installation Guide or the Documentation CD provided with the server, or to the server documentation located in the Support section at the following URL: www.hp.com/servers/dl140.


Telco Rack Support Telco Rack Kit:
Support for all 2-post Telco racks requires the use of the standard rack kit and an additional option kit from Rack Solutions.
http://www.racksolutions.com/hp

Factory Express Portfolio for Servers and Storage

HP Factory Express offers configuration, customization, integration and deployment services for HP servers and storage products. Customers can choose how their factory solutions are built, tested, integrated, shipped and deployed.

Factory Express offers service packages for simple configuration, racking, installation, complex configuration and design services as well as individual factory services, such as image loading, asset tagging, and custom packaging. HP products supported through Factory Express include a wide array of servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades, HP BladeSystem, HP 9000 servers as well as the MSAxxxx, VA7xxx, EVA, XP, rackable tape libraries and configurable network switches.

For more information on Factory Express services for your specific server model please contact your sales representative or go to: http://www.hp.com/go/factory-express.


HP Enterprise Configurator

The HP eCo-Enterprise Configurator now provides factory default racking for our HP hardware portfolio. This approach is aligned with our strategic direction to meet the needs and expectations of our valued customers. If you require "custom" rack configuration, please contact HP's Customer Business Center or an Authorized Partner for assistance.


Service and Support

HP Care Pack Services provide total care and support expertise with committed response designed to meet your IT and business needs.

HP Care Pack services include coverage for the HP branded hardware options qualified for the server that are purchased at the same time or afterward and internal to the enclosure. It also includes the 22" and smaller external monitors and tower UPS options up to 3kVA. These items will be covered at the same service level and for the same coverage period as the server. Coverage of UPS Battery is not included and standard warranty terms & conditions apply. For servers or storage systems installed within a rack, service also covers all HP qualified rack options installed within the same rack.

To fully capitalize on your HP ProLiant servers' capabilities requires a service partner who thoroughly understands your server technology and systems environment. HP Services, an industry leader in provision of multi vender support solutions provides a range of support services designed to meet the varying needs of business. Whether an SMB or large global corporation HP has a ProLiant server support offer to help you speedily deploy and maximize system uptime.

Recommended Service - Simplify ProLiant solution implementation, maintenance and management.

  • Support Service -3 Year, 9x5 Next Business Day coverage, excluding HP holidays only
  • Deployment Service - Hardware Installation only

Enhanced Service - Optimize service level to increase IT performance and availability

  • Support Service - 3 Year 13x5 Same Business Day, 4-Hour response coverage
  • Deployment Service - Installation and Start-up only

Installation & Start-Up of a ProLiant server and Microsoft or Linux O/S per the Customer Description and/or Data Sheet. To be delivered on a scheduled basis 8am-5pm, M-F, excl. HP holidays.

For a complete listing of service offerings and information visit:
http://www.hp.com/services/proliantservices
http://www.hp.com/go/proliant/carepack

contents
 Overview      Standard Features      HPC Interconnects      Models      Configuration Information - Factory Integrated Models      DL140 G3 Options      DL140 G3 Memory      Storage      Power Specifications      System Specifications      DL140 G3 QuickSpecs images/line.gif (50 bytes)

HPC Interconnects

NOTE: High Performance Computing (HPC) interconnect technologies are available for the DL140 under the Cluster Platform product portfolio. These high-speed interconnects are fully supported by HP when they are part of these configure to order clusters. Solutions can be defined with a lot of flexibility with the help of configuration tools. Please visit the following URL to configure HPC Clusters with InfiniBand, Gigabit Ethernet or Myrinet Interconnects: http://www.hp.com/techservers/clusters/ucp/index.html

HPC Interconnect InfiniBand PCI-X and PCI-Express adapters
Gigabit Ethernet Use embedded ports
Myrinet XP PCI-X Rev D, Rev E and Rev F adapters
contents
 Overview      Standard Features      HPC Interconnects      Models      Configuration Information - Factory Integrated Models      DL140 G3 Options      DL140 G3 Memory      Storage      Power Specifications      System Specifications      DL140 G3 QuickSpecs images/line.gif (50 bytes)

Models

Non Hot Plug Serial ATA (SATA) Models

HP DL140G3 E5345 417748-001

HP DL140G3 E5310
417746-001

HP DL140G3 5160
417759-001

HP DL140G3 5140
417757-001

HP DL140G3 5110
417756-001

Processor(s)
One of the following depending on model
(1) Quad-Core Intel® Xeon® processor E5345 (2.33 GHz, 80 W, 1333 MHz FSB)
(1) Quad-Core Intel® Xeon® processor E5310 (1.60 GHz, 80 W, 1066 MHz FSB)
(1) Dual-Core Intel® Xeon® processor 5160 (3.00 GHz, 80 W, 1333 MHz FSB)
(1) Dual-Core Intel® Xeon® processor 5140 (2.33 GHz, 65 W, 1333 MHz FSB)
(1) Dual-Core Intel® Xeon® processor 5110 (1.60 GHz, 65 W, 1066 MHz FSB)
Cache Memory8MB (2 x 4MB) Level 2 cache (5300 sequence)
4MB (1 x 4MB) Level 2 cache (5100 sequence)
Memory1 GB (2 x 512 MB) PC2-5300 DDR2 Fully Buffered DIMMs (667MHz) with Advanced ECC capabilities
Network ControllerTwo embedded NC320i PCIe Gigabit Server Adapters
Storage ControllerHP Embedded SATA RAID Controller
Hard Drive80GB NHP SATA HDD
Internal Storage1TB maximum (2 x 500GB Non-Hot plug 3.5" SATA hard drives)
Optical DriveOptional CD-ROM, DVD-ROM, DVD RW, DVD/CD RW
Form Factor Rack (1U)

Hot Plug Serial ATA (SATA)/Serial Attached SCSI (SAS) Models

HP DL140G3 E5345
417749-001

HP DL140G3 E5310
417747-001

HP DL140G3 5160
417755-001

HP DL140G3 5140
417754-001

HP DL140G3 5110
417753-001

Processor(s)
One of the following depending on model
(1) Quad-Core Intel® Xeon® processor E5345 (2.33 GHz, 80 W, 1333 MHz FSB)
(1) Quad-Core Intel® Xeon® processor E5310 (1.60 GHz, 80 W, 1066 MHz FSB)
(1) Dual-Core Intel® Xeon® processor 5160 (3.00 GHz, 80 W, 1333 MHz FSB)
(1) Dual-Core Intel® Xeon® processor 5140 (2.33 GHz, 65 W, 1333 MHz FSB)
(1) Dual-Core Intel® Xeon® processor 5110 (1.60 GHz, 65 W, 1066 MHz FSB)
Cache Memory8MB (2 x 4MB) Level 2 cache (5300 sequence)
4MB (1 x 4MB) Level 2 cache (5100 sequence)
Memory1 GB (2 x 512 MB) PC2-5300 DDR2 Fully Buffered DIMMs (667MHz) with Advanced ECC capabilities
Network Controller

Two embedded NC320i PCIe Gigabit Server Adapters

Storage ControllerHP 8 Internal Port SAS HBA with RAID
Hard DriveNone ship standard (up to 2 Hot Plug SATA or SAS drives supported)
Internal Storage1.5TB max. (2 x 750GB Hot Plug 3.5" SATA hard drives) or 600GB (2 x 300GB Hot Plug 3.5" SAS hard drives)
Optical DriveOptional CD-ROM, DVD-ROM, DVD RW, DVD/CD RW
Form Factor Rack (1U)
AvailabilityHot Plug Hard Drives
contents
 Overview      Standard Features      HPC Interconnects      Models      Configuration Information - Factory Integrated Models      DL140 G3 Options      DL140 G3 Memory      Storage      Power Specifications      System Specifications      DL140 G3 QuickSpecs images/line.gif (50 bytes)

Configuration Information - Factory Integrated Models

NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on CTO product offerings and requirements.
NOTE: HP does not allow factory integration of options into standard models listed above.
Configure-to-order servers must start with a CTO Chassis.
NOTE: This product offering does not support HP Factory Express Server Configuration Level 1.
NOTE: FIO indicates that this option is a Factory Installable Option.
Step 1: Base Configuration (choose one of the following configurable models)
 Non-Hot Plug Model 
HP ProLiant DL140 G3 Non- Hot Plug SATA Rack CTO Chassis
409023-B21
Factory Integrated Model ships with:
Two integrated Broadcom 10/100/1000 NICs (Wake on LAN and PXE capable)

Two available PCI-Express slots:

Slot 1: full-length/full-height PCI-Express x16
Slot 2: low-profile/half-height PCI-Express x8

(NOTE: Optional PCI-X option kit includes: Slot 1: full-length/full-height PCI-X 100; Slot 2: low-profile/half-height PCI-X 100. PCI-X slots are 64 bits; 133 MHz capable if only one PCI-X card is installed in the server)

HP Embedded SATA RAID Controller
650 Watt Power Supply
One Highline IEC Power Cord  
6 Non-Hot Plug Fans 
Rack (1U), (1.75 in / 4.45 cm)
HP ProLiant DL140 G3 Hot Plug SAS/SATA Rack CTO Chassis
409024-B21
Factory Integrated Model ships with:
Two integrated Broadcom 10/100/1000 NICs (Wake on LAN and PXE capable)

One available PCI-Express slot:

Slot 1: full-length/full-height PCI-Express x16
Slot 2: low-profile/half-height PCI-X slot populated by the SAS/SATA storage controller

(NOTE: Optional PCI-X option kit includes: Slot 1: full-length/full-height PCI-X 100; and Slot 2: low-profile/half-height PCI-X 100. PCI-X slots are 64 bits; 133 MHz capable if only one PCI-X card is installed in the server)

One HP SAS/SATA Host Cable Kit  
One Hot Plug Backplane Option Kit  
650 Watt Power Supply  
One Highline IEC Power Cord  
6 Non-Hot Plug Fans 
Rack (1U), (1.75 in / 4.45 cm) 

Step 2: Choose Required Options (only one of the following from each list unless otherwise noted)
ProcessorsQuad-Core Intel® Xeon® processor X5365 (3.0 GHz, 120W, 1333MHz Front Side Bus, FSB)
452997-B21
Quad-Core Intel® Xeon® processor X5355 (2.66 GHz, 120 W, 1333 MHz FSB) FIO BASE
409279-B21
Quad-Core Intel® Xeon® processor E5345 (2.33 GHz, 80 W, 1333 MHz FSB) FIO BASE
409159-B21
Quad-Core Intel® Xeon® processor E5335 (2.00 GHz, 80 W, 1333 MHz FSB) FIO BASE
442992-B21
Quad-Core Intel® Xeon® processor L5335 (2.00GHz, 50W, 1333 MHz FSB) FIO BASE
453475-B21
Quad-Core Intel® Xeon® processor L5320 (1.86GHz, 50W, 1066 MHz FSB) FIO BASE
442995-B21
Quad-Core Intel® Xeon® processor E5320 (1.86 GHz, 80 W, 1066 MHz FSB) FIO BASE
409157-B21
Quad-Core Intel® Xeon® processor E5310 (1.60 GHz, 80 W, 1066 MHz FSB) FIO BASE
409278-B21
Dual-Core Intel® Xeon® processor 5160 (3.00 GHz, 80 W, 1333 MHz FSB) FIO BASE
417786-B21
Dual-Core Intel® Xeon® processor 5150 (2.66 GHz, 65 W, 1333 MHz FSB) FIO BASE
417784-B21
Dual-Core Intel® Xeon® processor 5148 (2.33 GHz, 40 W, 1333 MHz FSB) FIO BASE
433253-B21
Dual-Core Intel® Xeon® processor 5140 (2.33 GHz, 65 W, 1333 MHz FSB) FIO BASE
417774-B21
Dual-Core Intel® Xeon® processor 5130 (2.0 GHz, 65 W, 1333 MHz FSB) FIO BASE
417772-B21
Dual-Core Intel® Xeon® processor 5110 (1.60 GHz, 65 W, 1066 MHz FSB) FIO BASE
417770-B21

Memory1 GB FBD PC2-5300 2X512 Kit
2 GB FBD PC2-5300 2x1GB LP Kit461826-B21 461826-B21
2 GB FBD PC2-5300 2X1GB Kit
4 GB FBD PC2-5300 2X2GB Kit
8 GB FBD PC2-5300 2X4GB Kit

Hard Drive Serial-ATA (SATA) Non-Hot Plug Hard Drives (To be used with Non-Hot Plug CTO Chassis Models Only)  
HP 80GB 1.5G SATA 7.2K NHP 3.5" HDD
HP 160GB 1.5G SATA 7.2K NHP 3.5" HDD
HP 250GB 1.5G SATA 7.2K NHP 3.5" HDD
HP 500GB 1.5G SATA 7.2K NHP 3.5" HDD, FIO*
404469-B21
*Factory Integrated Only  
Serial-ATA (SATA) Hot Plug Hard Drives (To be used with SAS/SATA Hot Plug CTO Chassis Models Only)
HP 80GB SATA 7.2K Hot Plug 3.5" HDD
HP 160GB SATA 7.2K Hot Plug 3.5" HDD
HP 250GB SATA 7.2K Hot Plug 3.5" HDD
HP 500GB SATA 7.2K Hot Plug 3.5" HDD

395473-B21 395473-B21

HP 750GB SATA 7.2K Hot Plug 3.5" HDD
Serial-Attached SCSI (SAS) Hot Plug Hard Drives (To be used with SAS/SATA Hot Plug CTO Chassis Models Only)
NOTE: A SAS HBA or Array Controller is required.
 
HP 72GB 3G SAS 15K 3.5" SP HDD
HP 146GB 3G SAS 15K 3.5" SP HDD
HP 300GB 3G SAS 15K 3.5" SP HDD

Storage Controllers SAS HBA
HP 8 Internal Port SAS HBA with RAID
NOTE: For use with Hot Plug SAS/SATA CTO Chassis models. Required only when upgrading from a non-hot plug to a hot-plug model.
NOTE: The selection HP 8 Internal Port SAS HBA with RAID requires the purchase of the PCI-X Riser Option kit (P/N 409347-B21)
HP SC44Ge Host Bus Adapter
NOTE: SAS HBA
SAS Controllers
HP Smart Array E200 Controller
HP Smart Array E200/128 BBWC Controller
NOTE: Selection of the E500 with the E200 will prevent installation of the E500 battery-backed write cache module.
128-MB BBWC (Battery-Backed Write Cache) Enabler
HP Smart Array E500 Controller
HP Smart Array E500/256MB Controller (Standard RAID 0,1, 1+0)
NOTE: Selection of the E500 with the E200 will prevent installation of the E500 battery-backed write cache module.
435129-B21 435129-B21
256MB Battery-backed write cache upgrade for RAID 5 support
NOTE: when installing a battery-backed write cache module, the HP Smart Array E500 must be installed in the full-length PCI slot
383280-B21 383280-B21
SCSI Controller  
HP Single Channel U320 SCSI Controller 374654-B21 374654-B21
SCSI HBA  
HP SC11Xe Host Bus Adapter
NOTE: U320 HBA with tape support only.
412911-B21 412911-B21

Step 3: Choose Additional Options for Factory Integration
NOTE: For additional options, please refer to the "Options" section below. Some options may not be available for factory integration. Please contact an HP sales representative for additional information.
contents
 Overview      Standard Features      HPC Interconnects      Models      Configuration Information - Factory Integrated Models      DL140 G3 Options      DL140 G3 Memory      Storage      Power Specifications      System Specifications      DL140 G3 QuickSpecs images/line.gif (50 bytes)

Options

Server Management Stand Alone Software Product and ProLiant Essentials
NOTE: Electronic licensing options are available for Insight Control suites and select ProLiant Essentials software products. Please see the appropriate Insight Control and ProLiant Essentials QuickSpecs for additional information. 
Deploy
ProLiant Essentials Rapid Deployment Pack
ProLiant Essentials Rapid Deployment Pack No Media 1-Server License including 1 year of 24x7 Technical Support and Updates
NOTE: This license allows 1 server to be deployed and managed via RDP. Customer will receive a printed license entitlement certificate via physical shipment. The license entitlement certificate must be redeemed online or via fax in order to obtain the license activation key(s). Includes one year of 24 x 7 HP Software Technical Support Service.
452151-B21
NOTE: For additional ProLiant Essentials Rapid Deployment Pack License Kits please see the QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/11053_na/11053_na.html 
Control
Integrated Lights-Out 100i Select Pack and Advanced Pack
HP Lights Out 100i Select Pack 1-Server License
413111-B21
HP Lights Out 100i Advanced Pack 1-Server License
413115-B21
NOTE: Flexible and volume quantity (AKA) license kits are available for both the Lights-Out 100i Select and Lights-Out 100i Advanced Pack licenses as well as Electronic License To Use (E-LTU). AKA Tracking licenses require a 100 unit minimum forecast at initial contract signing. For these additional part numbers, please refer to QuickSpecs at this link for more information: http://h18004.www1.hp.com/products/servers/management/remotemgmt.html
NOTE:
For additional ProLiant Integrated Light-Out Select Pack and Advanced Pack License Kits please see the QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/12087_na/12087_na.html
 
NOTE: Flexible and volume quantity license kits are available for ProLiant Essentials Value Packs. Refer to: http://www.hp.com/servers/proliantessentials or the various ProLiant Essentials Value Pack product QuickSpecs for more information.
NOTE: For more information regarding ProLiant Essentials Software, please see the following URL: http://www.hp.com/servers/proliantessentials.
 

Processor Quad-Core Intel® Xeon® processor X5365 (3.0 GHz, 120W, 1333MHz FSB)
452997-B21
Quad-Core Intel® Xeon® processor X5355 (2.66 GHz, 120 W, 1333 MHz FSB) Option Kit
409279-B21
Quad-Core Intel® Xeon® processor E5345 (2.33 GHz, 80 W, 1333 MHz FSB) Option Kit
409159-B21
Quad-Core Intel® Xeon® processor E5335 (2.00 GHz, 80 W, 1333 MHz FSB) Option Kit
442992-B21
Quad-Core Intel® Xeon® processor L5335 (2.00GHz, 50W, 1333 MHz FSB, Low Voltage) Option Kit
453475-B21
Quad-Core Intel® Xeon® processor L5320 (1.86 GHz, 50W, 1066 FSB) Option Kit
442995-B21
Quad-Core Intel® Xeon® processor E5320 (1.86 GHz, 80 W, 1066 MHz FSB) Option Kit
409157-B21
Quad-Core Intel® Xeon® processor E5310 (1.60 GHz, 80 W, 1066 MHz FSB) Option Kit
409278-B21
Dual-Core Intel® Xeon® processor 5160 (3.00 GHz, 80 W, 1333 MHz FSB) Option Kit
417786-B21
Dual-Core Intel® Xeon® processor 5150 (2.66 GHz, 65 W, 1333 MHz FSB) Option Kit
417784-B21
Dual-Core Intel® Xeon® processor 5148 (2.33 GHz, 40 W, 1333 MHz FSB, Low Voltage) Option Kit
433253-B21
Dual-Core Intel® Xeon® processor 5140 (2.33 GHz, 65 W, 1333 MHz FSB) Option Kit
417774-B21
Dual-Core Intel® Xeon® processor 5130 (2.00 GHz, 65 W, 1333 MHz FSB) Option Kit
417772-B21
Dual-Core Intel® Xeon® processor 5110 (1.60 GHz, 65 W, 1066 MHz FSB) Option Kit
417770-B21

Memory (FBDIMMs)

1 GB FBD PC2-5300 2 X 512 Kit
2 GB FBD PC2-5300 2 x 1 GB LP Kit
2 GB FBD PC2-5300 2 X 1 GB Kit
4 GB FBD PC2-5300 2 X 2 GB Kit
8 GB FBD PC2-5300 2 X 4 GB Kit

Hard Drives Serial-ATA (SATA) Non-Hot Plug Hard Drives (Non-Hot Plug Models Only)
HP 80GB 1.5G SATA 7.2K NHP 3.5" HDD
HP 160GB 1.5G SATA 7.2K NHP 3.5" HDD
HP 250GB 1.5G SATA 7.2K NHP 3.5" HDD
NOTE: When purchasing systems with the 500GB Non-Hot Plug SATA drives, please reference the Configuration Information Section of this QuickSpecs to order via Configuration to Order.  
Serial-ATA (SATA) Hot Plug Hard Drives (SAS/SATA Hot Plug Models Only)
NOTE: A SAS HBA or Array Controller is required.
HP 80GB SATA 7.2K Hot Plug 3.5" HDD
HP 160GB SATA 7.2K Hot Plug 3.5" HDD
HP 250GB SATA 7.2K Hot Plug 3.5" HDD
HP 500GB SATA 7.2K Hot Plug 3.5" HDD
HP 750GB SATA 7.2K Hot Plug 3.5" HDD
Serial-Attached SCSI (SAS) Hot Plug Hard Drives (SAS/SATA Hot Plug Models Only)
HP 72GB 3G SAS 15K 3.5" DP HDD
HP 72GB 3G SAS 15K 3.5" SP HDD
HP 146GB 3G SAS 15K 3.5" DP HDD
HP 146GB 3G SAS 15K 3.5" SP HDD
HP 300GB 3G SAS 15K 3.5" DP HDD
HP 300GB 3G SAS 15K 3.5" SP HDD
NOTE: The purchase of SAS HBA or array controller is required.  

Graphic Cards NVIDIA Quadro FX3500 256MB PCIe
435681-B21
NVIDIA Quadro FX1500 256MB PCIe
435703-B21
NOTE: Graphic cards are supported on Windows 2003 and Linux Operating Systems.  

Optical Drives DVD-ROM Drive (optional)
24x CD-ROM Drive (optional)
349046-B21
DVD-RW Drive (optional)
395498-B21
DVD/CD RW Drive (optional)
377402-B21
Multibay II DVD/CD-RW Combo Drive
NOTE: When purchasing the Multibay II DVD/CD-RW Combo Drive, (P/N PA850A), the USB 2.0 Multibay II Cradle (P/N PA509A) is required.
PA850A
USB 2.0 MultiBay II Cradle, External
NOTE: When purchasing the Multibay II DVD/CD-RW Combo Drive, (P/N 850A), the USB 2.0 Multibay II Cradle, (P/N PA509A) is required.
PA509A

Storage Controllers SAS HBA
HP 8 Internal Port SAS HBA with RAID
NOTE: For use with Hot Plug SAS/SATA models. Required only when upgrading from a non-hot plug to a hot plug model.
NOTE: The selection HP 8 Internal Port SAS HBA with RAID requires the purchase of the PCI-X Riser Option kit (P/N 409347-B21)
HP SC44Ge Host Bus Adapter
NOTE: SAS HBA.
SAS Controller
HP SAS/SATA Host Cable Kit
NOTE: For use with Hot Plug SAS/SATA models. Required only when upgrading from a non-hot plug to a hot plug model.
389650-B21
HP Smart Array E200 Controller
HP Smart Array E200/128 BBWC Controller
NOTE: Selection of the E500 with the E200 will prevent installation of the E500 battery-backed write cache module.
128-MB BBWC (Battery-Backed Write Cache) Enabler
HP Smart Array E500 Controller
HP Smart Array E500/256MB Controller (Standard RAID 0,1, 1+0)
NOTE: Selection of the E500 with the E200 will prevent installation of the E500 battery-backed write cache module.
256MB Battery-backed write cache upgrade for RAID 5 support
NOTE: when installing a battery-backed write cache module, the HP Smart Array E500 must be installed in the full-length PCI slot.
HP PCI-C Riser Board  
HP PCI-X Riser Board Kit 409347-B21
Hot Plug Backplane  
Hot Plug Backplane Option Kit
NOTE: Required when upgrading from a non-hot plug to a hot plug model.
 
SCSI Controller  
64-Bit/133-MHz Single Channel Ultra320 SCSI HBA G2 374654-B21 374654-B21
SCSI HBA  
HP SC11Xe Host Bus Adapter
NOTE: U320 HBA with tape support only.
412911-B21 412911-B21

Communications HP NC110T PCI Express 1 Port Gigabit Server Adapter
NOTE: Does not support Windows 2000.
HP NC360T PCI Express Dual Port Gigabit Server Adapter
HP NC364T PCI Express Quad Port Gigabit Server Adapter
NOTE: Does not support Windows 2000.
HP NC373F PCI Express Multifunction Gigabit Server Adapter
HP NC373T PCI Express Multifunction Gigabit Server Adapter
HP NC380T PCI Express Dual Port Multifunction Gigabit Server Adapter
NOTE: Supported on a Full Length-Full Height slot only.
HP NC510C PCIe 10 Gigabit Server Adapter
NOTE: A minimum of 1 gigabyte (1 GB) of server memory is required per each NC510C adapter.
HP NC510F PCIe 10 Gigabit Server Adapter
NOTE: A minimum of 1 gigabyte (1 GB) of server memory is required per each NC510F adapter.

HPC Specific Options

InfiniBand 4X PCI-E Dual Port Host Adapter

380298-B21

InfiniBand 4X PCI-X Dual Port Host Adapter
380299-B21
HP IB 4X DDR PCI-e Dual Port 0 Memory HCA 483513-B21
HP IB 4X DDR PCI-e DUAL PORT HCA
HP IB 4X DDR PCI-e Dual Port HCA
Myrinet PCI 2XP Rev-E 4MB Network Interface Card
373983-B21
Myrinet 2XP PCI-X, Fiber F-Series, 2MB NIC
390456-B21
NOTE: For HPC interconnect adapters please see the HPC Interconnect section of this QuickSpecs.  

Rack Kits 1U Cable Management Arm
NOTE: Package contains two cable management arms

365403-B21


Tape DrivesUSB Tape Drives  
HP StorageWorks 1U USB Rack-Mount Kit with one DAT 72 USB Tape Drive
AG594A
HP StorageWorks 1U USB Rack-Mount Kit with one DAT 160 USB Tape Drive
AG703A
Ultrium External Tape Drive
HP StorageWorks Ultrium 232 Internal Tape Drive, (Carbonite)
NOTE: HP recommends combining this tape drive with the 1U SCSI Rack-Mount kit (A7445B A7445B) for a complete rack-mount solution.
Rack-Mount Tape Drive
HP StorageWorks 1U SCSI Rack-Mount kit
NOTE: The 1U Rack-Mount Kit can support up to (2) half-height tape drives and is compatible with multiple Single-Ended and LVD SCSI tape drives including the DAT 24, DAT 40, DAT 72, DLT VS80, DLT VS160, Ultrium 215, Ultrium 232, Ultrium 448 and Ultrium 920 tape drives.
HP StorageWorks 1U USB Rack-Mount Kit
NOTE: The 1U USB Rack-Mount Kit can support up to (2) half-height tape drives and is compatible with the DAT 24 USB, DAT 40 USB and DAT 72 USB tape drives.
NOTE: When attaching to an external tape drive, autoloader or library, you must also purchase a HBA
NOTE: For a complete listing of HP tape drive offerings supported with the DL140 G3, visit: http://www.hp.com/products1/storage/compatibility/tapebackup/ISS/index.html
 

HP D2D Backup SystemHP StorageWorks D2D110 Backup System
NOTE: 1TB of Disk Storage.
EH880A
HP StorageWorks D2D110 Backup System with Data Protector Express Software Kit
NOTE: 1TB of Disk Storage.
EH923A
HP StorageWorks D2D120 Backup System
NOTE: 2TB of Disk Storage.
EH884A
HP StorageWorks D2D120 Backup System with Data Protector Express Software Kit
NOTE: 2TB of Disk Storage.
EH924A

HP StorageWorks D2D130 Backup System
NOTE: 3TB of Disk Storage.

EH950A

HP StorageWorks D2D130 Backup System with Data Protector Express Software Kit
NOTE: 3TB of Disk Storage.

EH951A

HP StorageWorks D2D130 Backup System with LTO-3 Ultrium 920 SAS Tape Drive
NOTE: 3TB of Disk Storage.

EH952A
NOTE: Please see the HP D2D Backup Systems QuickSpecs for additional information:
http://h18000.www1.hp.com/products/quickspecs/12651_na/12651_na.html
 

StorageWorks Options StorageWorks Fibre Channel HBA  
NOTE: The following is a list of all Fibre Channel Host Bus Adapters for Windows and Linux. For detailed compatibility information please see: http://h18006.www1.hp.com/storage/saninfrastructure/hba.html  
HP StorageWorks 4 Gb PCI-X 2.0-to-Fibre Channel HBA AB429A AB429A
HP StorageWorks 4 Gb PCI-X 2.0 DC-to-Fibre Channel HBA AE369A AE369A
HP StorageWorks FC2142SR 4 Gb PCI-e HBA A8002A A8002A
HP StorageWorks FC2242SR Dual Channel 4 Gb PCI-e HBA A8003A A8003A
HP StorageWorks FC1142SR 4 Gb PCI-e HBA AE311A AE311A
HP StorageWorks FC1242SR Dual Channel 4 Gb PCI-e HBA AE312A AE312A
HP StorageWorks FC2143 4Gb PCI-X 2.0 HBA AD167A AD167A
HP StorageWorks 81Q PCI-e FC HBA AK344A AK344A
StorageWorks SCSI HBA  
HP U320e SCSI Host Bus Adapter
NOTE: Recommended Dual Channel Ultra320 SCSI Controller for connecting multi-drive MSL tape libraries to ProLiant servers
AH627A AH627A
HP StorageWorks FC2243 4Gb PCI-X 2.0 DC HBA AD168A AD168A
StorageWorks Connection Kit  
HP StorageWorks 8Gb Simple SAN Connection Kit AK241A
StorageWorks Fibre Channel Switch  
HP StorageWorks 8/20q Fibre Channel Switch AK242A

USB Options HP 1GB USB 2.0 Floppy Drive Key 442085-B21
HP 256MB USB 2.0 Floppy Drive Key 442084-B21
USB 1.44-MB External Diskette Drive DC141B
USB Floppy Drive DC361B
HP USB-P/S2 Mouse DC369A
HP Keyboard (USB) standard 2004 DT528A#xxx
USB 2.0 4-port HUB DG954A

HP KVM Switch Options2x1x16 IP Console Switch with Virtual Media AF601A AF601A
4x1x16 IP Console Switch with Virtual Media AF602A AF602A
2x16 Server Console Switch with Virtual Media AF600A AF600A
PS/2 Virtual Media Interface Adapter, 1 pack
NOTE: Requires PS/2 and one USB port on server.
AF604A AF604A
HP Server Console Switch (KVM), 0 x 1 x 8 port336044-B21 336044-B21
HP Server Console Switch (KVM), 0 x 2 x 16 port336045-B21 336045-B21
PS/2 Interface Adapter, 1 pack262588-B21 262588-B21
PS/2 Interface Adapter, 8 pack262587-B21 262587-B21
USB Interface Adapter, 1 pack336047-B21 336047-B21
Serial Interface Adapter - 1 pack with power supply373035-B21 373035-B21
HP 1x4 Console SwitchAF611A AF611A
HP PS2 Server Console Cable, 6 foot, 2-PackAF612A AF612A
HP USB Server Console Cable, 6 foot, 2-Pack
NOTE: required for supporting USB peripherals.
AF613A AF613A
NOTE: Cat5e cables are required to connect Interface Adapters to Console Switches. Cat5e cables can be found at the following URL: http://www.hp.com/go/kvm  

HP Serial Console Server OptionsHP 16 Port Serial Console Server (worldwide) AF101A AF101A
HP 48 Port Serial Console Server (worldwide) AF102A AF102A
Serial Adapter, RJ45-D89 DCE Female, 1-pack AF103A AF103A
Serial Adapter, RJ45-D89 DCE Female, 8-pack AF110A
NOTE: For additional information regarding KVM switches, Serial Console servers, rack mount monitors, keyboards and all related options please see the following URL: http://www.hp.com/go/kvm 

Service and Support Offerings (HP Care Pack Services)

 

Hardware Services 4-Hour On-site Service
13-Hour x 5-Day Coverage, 3 Years, Electronic
U9509E
Hardware Services Next Business Day On-Site Service
9-Hour x 5-Day Coverage, 3 Years, Electronic
U9508E
Hardware Services 6-Hour Call to Repair On-Site Service
Hardware Installation, Electronic
U9520E
NOTE: For more information, customer/resellers can contact http://www.hp.com/services/carepack  
contents
 Overview      Standard Features      HPC Interconnects      Models      Configuration Information - Factory Integrated Models      DL140 G3 Options      DL140 G3 Memory      Storage      Power Specifications      System Specifications      DL140 G3 QuickSpecs images/line.gif (50 bytes)

Memory

HP ProLiant DL140 G3 (all models)
NOTE: Memory configurations listed do not apply to "Factory Integrated Models".
Standard Memory
1 GB (2 x 512 MB) PC2-5300 Fully Buffered DIMM memory, with Advanced ECC Capabilities Memory installed.

Maximum Memory

Up to 32GB memory is available with the optional installation of PC2-5300 Fully Buffered DIMM memory kits.
NOTE: Memory should be installed in pairs and matched for optimum performance.
NOTE: Chart does not represent all possible memory configurations.
Memory
Slot
 
1
2
3
4
5
6
7
8
Standard (1 GB)
512 MB
Empty
512 MB
Empty
Empty
Empty
Empty
Empty
Maximum (32 GB)
4 GB
4 GB
4 GB
4 GB
4 GB
4 GB
4 GB
4 GB

Following are memory options available from HP:

 

1 GB FBD PC2-5300 2 X 512 Kit

397409-B21 397409-B21

2 GB FBD PC2-5300 2 x 1 GB LP Kit461826-B21 461826-B21

2 GB FBD PC2-5300 2 X 1 GB Kit

397411-B21 397411-B21

4 GB FBD PC2-5300 2 X 2 GB Kit 397413-B21 397413-B21
8 GB FBD PC2-5300 2 X 4 GB Kit397415-B21 397415-B21
contents
 Overview      Standard Features      HPC Interconnects      Models      Configuration Information - Factory Integrated Models      DL140 G3 Options      DL140 G3 Memory      Storage      Power Specifications      System Specifications      DL140 G3 QuickSpecs images/line.gif (50 bytes)

Storage

1,2
Two Non-hot plug SATA or Two 3.5" Hot Plug SAS/SATA Hard Drive Bays
3
Optional CD-ROM, DVD-ROM, DVD RW, DVD/CD RW
4
Power On/Off
Drive Support

Removable Media
 
Quantity
Supported
Position
Supported

Controller
IDE (ATAPI) CD-ROM Drive
Up to 1
3
Integrated IDE (ATAPI) (optional)
DVD-ROM
Up to 1
3
Integrated IDE (ATAPI) (optional)
DVD RW
Up to 1
3
Integrated IDE (ATAPI) (optional)
DVD/CD RW
Up to 1
3
Integrated IDE (ATAPI) (optional)

DL140 G3 Hard Drives
SATA - Non-Hot Plug
 
Quantity
Supported
Position
Supported

Controller
3.5-inch

 

80 GB 7,200 rpm
Up to 2
1;2
HP Embedded SATA RAID Controller
160 GB 7,200 rpm
Up to 2
1;2
HP Embedded SATA RAID Controller
250 GB 7,200 rpm
Up to 2
1;2
HP Embedded SATA RAID Controller
500 GB 7,200 rpm
Up to 2
1;2
HP Embedded SATA RAID Controller
 
 
SAS/SATA Hot Plug
 
 
Quantity
Supported
Position
Supported

Controller
3.5-inch
 
80 GB SATA 7,200 rpm
Up to 2
1;2
HP Internal SAS HBA with RAID
160 GB SATA 7,200 rpm
Up to 2
1;2
HP Internal SAS HBA with RAID
250 GB SATA 7,200 rpm
Up to 2
1;2
HP Internal SAS HBA with RAID
500 GB SATA 7,200 rpm
Up to 2
1;2
HP Internal SAS HBA with RAID
750 GB SATA 7,200 rpm
Up to 2
1;2
HP Internal SAS HBA with RAID
72 GB SAS 15,000 rpm
Up to 2
1;2
HP Internal SAS HBA with RAID
146 GB SAS 15,000 rpm
Up to 2
1;2
HP Internal SAS HBA with RAID
300 GB SAS 15,000 rpm
Up to 2
1;2
HP Internal SAS HBA with RAID

Tape Drives

NOTE: For an up-to-date listing of the latest O/S Support details for each of the Tape Drives listed below, please see the following:
http://h18000.www1.hp.com/products/quickspecs/north_america/10233.html

NOTE: For complete listing of tape drive offerings see http://www.hp.com/products1/storage/compatibility/tapebackup/ISS/index.html
For recommended tape drive offerings for this ProLiant server see the following:

 
Position
Supported
Controller
Controller/HBA Option Kit Part Number
HP StorageWorks USB Tape
DAT 72 USB
DAT 160 USB
1U USB Rack-Mount Kit
External
USB 2.0 Port
N/A
 
HP StorageWorks SCSI Tape
Ultrium 232
DAT 72
DAT 160
1U USB Rack-Mount Kit
External
HP SC11Xe Host Bus Adapter

 

HP StorageWorks D2D Backup Systems
D2D110
D2D120
D2D130

External
Embedded Network Controller
N/A
contents
 Overview      Standard Features      HPC Interconnects      Models      Configuration Information - Factory Integrated Models      DL140 G3 Options      DL140 G3 Memory      Storage      Power Specifications      System Specifications      DL140 G3 QuickSpecs images/line.gif (50 bytes)

Power Specifications

650W Power Supply Spare Kit 416349-001
Operational Input Voltage Range (Vrms) 90Vac to 264Vac full range
Frequency Range (Nominal) (Hz) 47 Hz to 63 Hz
             
Nominal Input Voltage (Vrms)
100
115
200
220
230
240
Max Rated Output Wattage Rating
653.10
653.19
653.08
652.96
653.08
652.96
Nominal Input Current (A rms)
8.55
7.31
4.12
3.77
3.6
3.46
Max Rated Input Wattage Rating (Watts)
855
840.72
824.12
827.5
806.3
805.71
Max. Rated VA
(Volt-Amp)
990
990
990
990
990
990
Efficiency (%)
76.39
77.69
79.25
78.91
81
81.04
Power Factor
0.998
0.997
0.983
0.976
0.973
0.969
Leakage Current (mA)
<3.5mA
<3.5mA
<3.5mA
<3.5mA
<3.5mA
<3.5mA
Maximum Inrush Current (A peak)
60A
60A
60A
60A
60A
60A
Maximum Inrush Current Duration (mS)
1mS
1mS
1mS
1mS
1mS
1mS
contents
 Overview      Standard Features      HPC Interconnects      Models      Configuration Information - Factory Integrated Models      DL140 G3 Options      DL140 G3 Memory      Storage      Power Specifications      System Specifications      DL140 G3 QuickSpecs images/line.gif (50 bytes)

System Specifications

Power    
ProLiant DL140 G3 Fully Configured
115V/60Hz
220V/50Hz
Fully Loaded System Input Wattage (W)
651
638
Fully Loaded System Input Current (A rms)
5.7
3.0
Fully Loaded System Thermal (BTU- Hr)
2218
2174
Fully Loaded System VA (Volt-Amp)
657
657
System Leakage with all power supplies loaded (mA)
1.58
3.03
System Inrush Current with all power supplies loaded (A)
19
37
Power cord requirements
Nema 5-15P to IEC320-C13
IEC320-C13 to IEC320-C14
NOTE: Power shown is for a fully configured system consisting of (2) CPU, (8) double-sided DIMMs, (2) HDDs, (1) CD-ROM, and (2) PCI cards.
Power Cord
AF556A
contents
 Overview      Standard Features      HPC Interconnects      Models      Configuration Information - Factory Integrated Models      DL140 G3 Options      DL140 G3 Memory      Storage      Power Specifications      System Specifications      DL140 G3 QuickSpecs images/line.gif (50 bytes)

Quickspecs

System Unit Dimensions (HxWxD)
(with feet)
1.70 x 16.78 x 27.75 in (4.32 x 42.62 x 70.49 cm)
Weight (approximate)35 lb (15.87 kg)Fully configured (less rail kit)
Input Requirements
(per power supply)
Range Input Voltage90 to 140 VAC/180 to 264 VAC
Normal Line Voltage115 or 230 VAC
Line Frequency47 to 63 Hz
Rated Input Current load7.31A at 115VAC, 3.6A at 230VAC
BTU RatingBTU-Hr2228
Power Supply Output Power (per power supply)Rated Steady-State Power653W
Maximum Peak Power 
Temperature RangeOperating50 to 95 F (10 to 35 C)
Shipping-40 to 140 F (-40 to 60 C)
NOTE: All temperature ratings shown are for sea level. An altitude derating of 1 C per 304.8 m
(1.8F per 1,000 ft) to 3048 m (10,000 ft) is applicable. No direct sunlight allowed. Upper operating limit is 3,048m (10,000 ft) or 70 Kpa/10.1 psia. Upper non-operating limit is 9,144 m (30,000 ft) or 30.3KPa/4.4 psia. System performance may be reduced if operating above 30 C.
Relative Humidity
(non-condensing)
Operating10% to 85%
Non-operating10% to 95%
Acoustic NoiseIdle (Fixed Disk Drives Spinning) 
L WAd (BELS)6.96
Operating
(Random Seeks to Fixed Disks)
 
L WAd (BELS)7.0

Non-Hot Plug SATA Hard Drives 80 GB 7.2K
383410-B21 383410-B21
Capacity 80027 MB
Height 1.028 in (2.61 cm)
Width 4.0 in (10.16 cm)
Interface SATA 150
Transfer Rate Synchronous
(Maximum)
150 MB/s
Seek Time
(typical reads, including settling)
Single Track 0.8 ms
Average 9.0 ms
Full-Stroke 17.0 ms
Rotational Speed 7,200 rpm
Physical Configuration Bytes/Sector 512
Logical Blocks 160,086,528
Operating Temperature 41 to 131 F (5 to 55 C)

Two embedded NC320i PCIe Gigabit Server AdaptersNetwork Interface Compatibility10Base-T/100Base-TX/1000Base-TX
IEEE 802.3 10Base-T
IEEE 802.3 1000Base-T
IEEE 802.3 100Base-TX
Data Transfer Method64-bit, 133MHz PCI(X)1.0
Network Transfer Rate10Base-T (Half-Duplex)10 Mb/s
10Base-T (Full-Duplex)20 Mb/s
100Base-TX
(Half-Duplex)
100 Mb/s
100Base-TX
(Full-Duplex)
200 Mb/s
1000Base-TX
(Half and Full-Duplex)
2000 Mb/s
ConnectorRJ-45
Cable Support10Base-TCategories 3, 4 or 5 UTP; up to 328 ft (100 m)
10/100/1000Base-TXCategory 5 UTP (2 Pair); up to 328 ft (100 m)

Environment-friendly Products and ApproachEnd-of-life Management and Recycling

Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling programs in many geographic areas. For trade-in information, please go to: http://www.hp.com/go/green. To recycle your product, please go to: http://www.hp.com/go/green or contact your nearest HP sales office. Products returned to HP will be recycled, recovered or disposed of in a responsible manner.

The EU WEEE directive (2002/95/EC) requires manufacturers to provide treatment information for each product type for use by treatment facilities. This information (product disassembly instructions) is posted on the Hewlett Packard web site at: http://www.hp.com/go/green. These instructions may be used by recyclers and other WEEE treatment facilities as well as HP OEM customers who integrate and re-sell HP equipment.


Toll Free: 866.252.9743            Ph: 613.599.1287            Fax: 613.599.8120           
Servers | Blades | All Hard Drives | U320 Drives | SAS/SATA Drives | Memory | Controllers | Processors | Tape Drives | Power Supplies | Misc
Home | Shopping Cart | Delivery | Forgot Password | Order By Phone | Create an Account | Add to favorites
   
 Controllers                        LegalPrivacy | | Backup SiteContact us | Site Problem?  |  Controllers           Controllers           Controllers
Controllers Hard Drives SAS Hard Drives u320 Hard Drives u320 Hard Drives2 processors processors2 memory tape drives Misc ipphones servers blades power supplies