Description: 2 x HP P2000 2TB 3.5-inch Serial Attached SCSI (SAS) LFF 6G Dual Port Midline (MDL) Hot-Plug 7.2K MSA2 Hard Drive in HP MSA/MSA2 drive tray with interposer connector (as pictured ) In HP Hot-Plug MSA Hard Drive Tray (as pictured) For HP MSA1040 MSA2040 MSA2000/i and P2000 SAN Storage Arrays Genuine HP serial number and MSA/MSA2 firmware
Genuine HP manufactured Hard Drive
Note: For use in HP StorageWorks MSA/MSA2 Systems only.
Modular Smart Array (MSA) 2000/2000i Systems.
Modular Smart Array 2 (MSA2) 1040/2040/P2000 Systems.
Complete HDD compatibility table listed below.
Overview: HP MSA2 / MSA2000 controller enclosures and large form factor expansion enclosures accept unique HP SAS disk drive modules with different firmware and different trays than other HP storage arrays and Proliant servers. The disk drives have SAS interposers attached to the back which convert the native dual port SAS interface to an SCA-40 connector. While this SCA-40 connector has the same shape as a Fibre Channel (FC) connector, the drives are NOT utilizing the FC protocol. If you look closely at the interposer, the circuitry is rather simplistic and no bridge / translator chip is attached. The interposer is, more or less, acting as a signal filter and port relocator to connect to the MSA2's proprietary backplane.